Floor-Standing LiFePO4 51.2V 30KWH Solar Battery Cabinet Packz
| Products Details: |
| Item | Specification | Note |
Battery Pack | Nominal Voltage: | 51.2V | Support Customized 6.4V-96V |
| Nominal Capacity: | 30KWH | Any capacity can be customized |
| End of Discharge Voltage: | 58.4V | |
| End of charge Voltage: | 38.4V | |
| Max.Cont. Charge Current: | ≤100A | Free Customization Service |
| End of Charge Current: | 100mA | Free Customization Service |
| Nominal Discharge Current: | 100A-200A/Module | Free Customization Service |
| Max. Pulse Discharge Current: | 400A(3S)/Module | Free Customization Service |
| Internal Resistance: | ≤50mΩ | |
| Operating Charge Temperature: | 0～45℃ | |
| Operating Discharge Temperature: | -20～60℃ | |
| Storage Temp.(60-80% SOC Storage): | -10～45℃ | |
| Charge Method: | CC/CV | |
| BMS: | Built in BMS | Support Customized Extra Function |
| Dimension: | 690*560*580mm | |
| Weight: | 243KG | |
| Cycle Life: | 6000+ | (Cycle @RT, 1C rate) |
| Battery Cell Used | Prismatic LiFePO4 Cell/ Pouch LiFePO4 Cell | 3.2V 200AH | 16S1P |
| BMS | Charge Protection, Over charge Protection, Over Discharge Protection, Short Circuit Protection | Support Customized Extra Function of RS485/RS232/ CANbus |
| LED Indicator | / | / | |
Battery Case | Metal Case | / | |
| IP Grade: | IP56 | |
1. 51.2V 200AH LiFePO4 Battery Module, 2 modules in parallel.
2. Support smart communication function RS485/ RS232/ CAN bus and meet most of inverters / MPPT controllers.
3. Built in accurate coulomb counter (display), ON/OFF Switch, Handles and moving pulleys.
What Battery Cell We Use:
We are responsible for our customers and our brand.
Using only A grade cells, the cycle life can up to 6000-8000 times: 10AH/ 25AH/ 30AH/ 50AH/ 100AH/ 200AH...
1.Our batteries are the primary source of supply from the original cells manufacturer, battery cells are paired and distributed before outgoing, and can be assembled directly.
2.Through a number of certification and testing, quality assurance.
3.There are two types of pouch cells and prismatic cells. The pouch cells: lighter, cheaper, and easy to customized in special sizes. The prismatic cells: not easily deformed , stable performance, mature market, more popular at present.
Product Packaging
To Pack Wall-Mounted Lithium Ion Battery well. Generally, as follow:
1) Inner box - Carton - Pallet- Container
2) Packaging also can be made by customers’ requirements
Q1: What are there included for a battery or pack , may I buy charger from you?
A1: Battery case, BMS, battery pack, can buy customized connector, charger
Q2: How long frequency does recharge the battery?
A2: Usually per 2 months to recharge the battery pack , to charge full the battery depends on the charger current you use. 20A charger can charge full for 12V 100Ah battery in 5 hours, fast charger 50A in 2 hours.
Q3. What is your warranty?
A3: We offer 3 years warranty for all our battery pack for different situation. We ensure at least 3500 cycle life for the
LiFePO4 battery pack, which means, after 3500@85% DOD, there will still around 60% capacity left. You can use it for at least 10 years for normal 1 time charge and discharge everyday.
Q4: Can I customize the size of battery?
A4: Of course yes if your quantity MOQ workable.
Q5. Can we put different LiFePO4 battery pack in parallel or series by ourself?
A5: Yes. The battery can be put in parallel or series by customers. But there are few tips we need to pay attention;
1. Make sure the voltage of each battery are same before put in parallel. If they are not same, charge them to the same rate.
2. Don't not put discharged battery and undischarged battery in parallel. This may reduce the capacity of the whole battery pack.
3.Advise us the target capacity of the whole pack if you would like to put them in series. We will choose the suitable BMS for each battery.
4.If you are not professional in parallel and series batteries, please don't handle the battery by yourself. It may cause danger and hurt the cycle life of battery.
Q6. Can we use it for car engine?
A6: Yes, our battery pack include BMS, you can use it for low speed car only or aux. power for standard car. Do not use it for standard car directly, that will need more complex design BMS for the pack.
