LiFePO4 Lithium Polymer Battery OEM High Capacity Tablet PC Battery 4000mah 3.7V 14.8wh 606090 Polymer Li-ion Battery
Li-polymer Rechargeable Battery 3.7V 1200mAh LP503562 lithium battery for GPS tracker
If you don't see any products that match your requirements please contact us. We may not have it listed on our website yet.
Chalong Fly provides ODM&OEMs with assurances of quality for our products and services. We distribute battery packs and battery cells from many reputable brand names. We manufacture a variety of custom battery packs and power supplies made to customer specifications.
| Name | 606090 Lithium Polymer Battery 6000mah Rechargeable |
| Size | Thickness × Width × Length (mm) |
| 6±0.5×60.0±0.5×90 ± 0.5 |
| Nominal voltage | 3.7V |
| Nominal capacity | 4000mAh |
| Max charge current | 1C |
| Charging method | charge with constant current 1C to 4.2V, then charge with constant voltage 3.0V till charge current is less than 0.01C |
| Max discharge current | 1C |
| Discharge cut-off voltage | 3.0 V, the over-discharge detection voltage of PCM |
| Operating environment | Charging, 0°C ~ 65°C ; 65±20%RH |
| Discharging, -20°C~80°C ; 65±20%RH |
| Storage environment | -20°C~45° |
| 65±20%RH |
| storage for a long time(>3 months) and the storage condition shall be:<35°C;65±20%RH;3.7~3.9V |
| CycleLife(80%Prime Capacity) : | >800times |
| warranty | Period of warranty:12 months after sales |
| Identification | With protection board PCM for overcharging, over-discharging, short circuits, and over-voltage. |
| *Using the charger designated by the manufacturer (AEC). |
| *Don't throw the battery in the fire or heat it. |
| *Don't short-circuit. |
| *Don't unpack the battery or change its structure. |
| Pack design | * Battery pack should have sufficient strength and the battery should be protected from mechanical shock |
| * No cell movement in the battery pack should be allowed. |
| * No Sharp edge components should be inside the pack containing the battery. |
| Charging | The charging current and charging voltage should be less than specified in the Product Specification. |
| The charger shall be designed to comply with the Product Specification. |
| It is dangerous that charging with a higher current or voltage than Product Specification may cause damage to the cell's electrical, and mechanical safety performance. |
Attention:
1. Do not throw the battery into water or make it wet;
2. Keep the battery away from heat sources (like fire or heater);
3. Do not throw the battery into the fire or heat the battery;
4. Forbid to hammer to trample the battery;
5. Forbid disassembling the battery in any way
Features:
- Light weight and higher energy density
- All polymer lithium batteries' sizes and capacities can be customized
- 100% inspection before delivery
- Inspects inner resistance, discharge platform, and self-discharge
- lithium-ion batteries have better performance than Ni-Cd or Ni-MH battery
Our lithium polymer batteries can operate in a low-temperature environment of -40°C to 60°C. At low temperatures, the battery can achieve lower internal resistance, thereby achieving a higher discharge rate. Compared with the traditional lithium polymer battery, the battery breaks through the discharge temperature limit of -20℃ to 60℃.
You can add boards and wires and different interfaces according to customer requirements. Please contact online customer service for details.
Structure diagram of soft pack lithium battery
Using polymer material, the battery core does not fire, does not explode, and is highly leak-proof
